B&B-AGEMA GmbH

Veröffentlichungen

1971 1972 1973 1974 1975 1976 1977 1979 1983 1984 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022

¹ Univ.- Prof. Dr.-Ing. Dieter Bohn, Director a.D., IDG + LVS (Institut für Dampf- und Gasturbinen, RWTH Aachen University)
² KHI, Kawasaki Heavy Industries (Japan)

Bohn, D.¹, Kusterer, K., Sugimoto, T.², Tanaka, R.:: Conjugate Heat Transfer, Internal Flow, and External Flow Analyses for a Film-Cooled Blade; Proceedings of the International Conference on Power Engineering, ICOPE-03, Kobe, Japan, November 2003

Bohn, D.¹, Kusterer, K., Sugimoto, T.², Tanaka, R.²:: Conjugate Heat Transfer Analysis of a Test Configuration for a Film-cooled Blade; Proceedings of the International Gas Turbine Conference, IGTC-2003-TS-083, Tokyo, Japan, November 2003

Lepers, J., Paesler, L., Röper, R.:: Innovatives Verfahren für die energetische Verwertung von holzartiger Biomasse; Vortrag Arbeitsgruppe Biomasse, Landesinitiative Zukunftsenergien NRW, Werl, Germany, October 2003

Bohn, D.¹, Kusterer, K., Lepers, J., Ren, J.:: Cooling towers in the wind; CD adapco Dynamics, Issue 21 Fall 2003

Bohn, D.¹, Heuer, T., Kusterer, K.:: Conjugate Flow and Heat Transfer Analysis of a Turbo Charger; Proceedings of the International Symposium on Air-Breathing Engines, ISABE-2003-1167, Cleveland, USA, September 2003

Bohn, D.¹, Kusterer, K., Sugimoto, T., Tanaka, R.:: Conjugate Analysis of a Test Configuration for a Film cooled Blade Under Off-design Conditions; Proceedings of the International Symposium on Air-Breathing Engines, ISABE-2003-1167, Cleveland, USA, September 2003

Bohn, D.¹, Kusterer, K., Ren, J.:: Conjugate Heat Transfer Analysis for Film-cooling Configurations with Different Hole Geometries; ASME-paper GT-2003-38369, Proceedings of the ASME Turbo Expo 2003, Atlanta, USA, June 2003

Bohn, D.¹, Kusterer, K., Heuer, T.:: Conjugate Flow and Heat Transfer Investigation of a Turbo Charge: Part 1: Numerical Results; ASME-paper GT-2003-38445, Proceedings of the ASME Turbo Expo 2003, Atlanta, USA, June 2003

Bohn, D.¹, Lepers, J.:: Effects of Biogas Combustion on the Operation Characteristics and Pollutant Emissions of a Micro Gas Turbine; ASME-paper GT-2003-38767, Proceedings of the ASME Turbo Expo 2003, Atlanta, USA, June 2003

Bohn, D.¹, Kusterer, K., Ren, J.:: Conjugate Heat Transfer Analysis of Cooling Jets Ejected from a Row of Shaped Holes; 6th ISAIF Conference, Shanghai, China, April 2003

Bohn, D.¹, Kusterer, K., Ren, J.:: Influence of Conjugate Heat Transfer on Film Cooling; Proceedings of the 5th European Conference on Turbomachinery, pp. 475-485, Prag, Czech Republic, March 2003

---------------------------------------------------------------------------------------------------------------
Publications from Univ.- Prof. Dr.-Ing. D. Bohn, Director of the IDG (Institut für Dampf- und Gasturbinen, RWTH Aachen University):

Bohn, D., Ausmeier, S., Heuer, T., Wolff, M., Moritz, N.:: Gekoppelte Berechnung von Strömung und Wärmetransport in Verdichter, Turbine und Gehäuse einer Gasturbine; VGB PowerTech, Vol. 83, No. 11/2003

Kusterer, K., Bohn, D., Sugimoto, T., Tanaka, R.:: Conjugate Heat Transfer, Internal Flow, and External Flow Analyses for a Film-cooled Blade; ICOPE-03, Kobe, Paper-No. C103, pp. 143-148, Vol. 1, November 2003

Bohn, D., Moritz, N.:: Numerical Parametric Study on Full Coverage Cooled Multi-Layer Plates; International Gas Turbine Congress (IGTC) 2003 Tokyo, Japan, November 2003

Kusterer, K., Bohn, D., Sugimoto, T., Tanaka, R.:: Conjugate Heat Transfer Analysis of a Test Configuration for a Film-cooled Blade; International Gas Turbine Congress (IGTC) 2003 Tokyo, Japan, November 2003

Bohn, D., Balkowski, I., Ch. Tümmers, Sell, M.:: Numerical Investigation of two 3-D designed Profiles in a 2-Stage Turbine with Shrouded Blades; International Gas Turbine Congress (IGTC) 2003Tokyo, Japan, November 2003

Bohn, D., Sürken, N., S. Mizuki, H. Tsujita:: Numerical Investigation of Flow around the Leading Edge of a Turbine Blade with Transpiration Cooling; (1st Report, Properties for Fundamental Parameters) (in japanese), Transactions of the JSME, Vol. 69, No. 686-B, pp. 2221-2229, October 2003

Kusterer, K., Bohn, D., Ren, J.:: Cooling towers in the wind; CD adapco Dynamics, September 2003

Bohn, D., Kusterer, K., Sugimoto, T., Tanaka, R.:: Conjugate Analysis of a Test Configuration for a Film-cooled Blade under Off-design Conditions; ISABE-2003-1176, XVI ISABE, Cleveland, OH, USA, August 2003

Bohn, D., Heuer, T., Kusterer, K.:: Conjugate Flow and Heat Transfer Analysis of a Turbo Charger; ISABE-2003-1167, XVI ISABE, Cleveland, OH, USA, September 2003

Bohn, D., Sürken, N., Kreitmeier, F.:: Nucleation Phenomena in a Multi-Stage Low Pressure Steam Turbine; ImechE - Journal of Power and Energy, Part A, Vol. 217, Number 4, pp. 453-460, August 2003

Bohn, D., H. H.-W. Funke:

Experimental Investigations Into the Nonuniform Flow in a 4-Stage Turbine With Special Focus on the Flow Equalization in the First Turbine Stage

GT2003-38547, ASME Turbo Expo 2003, Atlanta, GA, USA, June 2003

Bohn, D., A. Decker, H. Ma, Wolff, M.:: Influence of Sealing Air Mass Flow on the Velocity Distribution in and inside the Rim Seal of the Upstream Cavity of a 1.5-Stage Turbine; GT-2003-38459, ASME Turbo Expo 2003, Atlanta, GA, USA, June 2003

Bohn, D., Wolff, M.:: Improved Formulation to Determine Minimum Sealing Flow - Cw, min - for Different Sealing Configurations; GT-2003-38465, ASME Turbo Expo 2003, Atlanta, GA, USA, June 2003

Bohn, D., Ch. Tümmers:: Numerical 3-D Conjugate Flow and Heat Transfer Investigation of a Transonic Convection-Cooled Thermal Barrier Coated Turbine Guide Vane with Reduced Cooling Fuid Mass Flow; GT2003-38431, ASME Turbo Expo 2003, Atlanta, GA, USA, June 2003

Bohn, D., Balkowski, I., H. Ma, Ch. Tümmers, Sell, M.:: Influence of Open and Closed Shroud Cavities on the Flowfield in a 2-Stage Turbine with Shrouded Bladings; GT2003-38436, ASME Turbo Expo 2003, Atlanta, GA, USA, June 2003

Bohn, D., Ren, J., Kusterer, K.:: Conjugate Heat Transfer Analysis for Film Cooling Configurations with Different Hole Geometries; GT-2003-38369, ASME Turbo Expo 2003, Atlanta, GA, USA, June 2003

Bohn, D., Moritz, N., Laschet, G., Rex, S.:: Homogenization of Material Properties of Transpiration Cooled Multilayer Plates GT2003-38439; ASME Turbo Expo 2003, Atlanta, GA, USA, June 2003

Bohn, D., Heuer, T., Kusterer, K.:: Conjugate Flow and Heat Transfer Investigation of a Turbo Charger: Part I - Numerical Results; GT2003-38445, ASME Turbo Expo 2003, Atlanta, GA, USA, June 2003

Bohn, D., Moritz, N., Wolff, M.:: Conjugate Flow and Heat Transfer Investigation of a Turbo Charger: Part II - Experimental Results; GT2003-38449, ASME Turbo Expo 2003, Atlanta, GA, USA, June 2003

Bohn, D., Lepers, J.:: Effects of Biogas Combustion on the operation characteristics and pollutant emissions of a micro gas turbine; GT2003-38767, ASME Turbo Expo 2003, Atlanta, GA, USA, June 2003

Bohn, D., Moritz, N., Ausmeier, S., Heuer, T., Wolff, M.:: Gekoppelte Berechnung von Strömung und Wärmetransport in Verdichter, Turbine und Gehäuse einer Gasturbine; VGB-Fachtagung "Gasturbinen und Gasturbinenbetrieb 2003", Bonn, Germany, May 2003

Bohn, D., Balkowski, I.:: Investigations on the Development of the Oxidation-Layer on a Steam Turbine Guide Vane - Interaction of the Steam Flow at Higher Steam Parameters of 620 °C and 94 bar.; VGB-PowerTech, Vol. 83, No. 4/2003, pp. 62-66, 2003

Bohn, D., Ren, J., Kusterer, K.:: Conjugate Heat Transfer Analysis of Cooling Jets Ejected from a Row of Shaped Holes; 6th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (6th ISAIF), Shanghai, China, April 2003

Bohn, D., Sürken, N., Kreitmeier, F.:: Nucleation Phenomena in a Multi-Stage Low Pressure Steam Turbine; Proceedings of the 5th European Conference on Turbomachinery, Prague, Czech Republic, March 2003

Bohn, D., Ren, J., Kusterer, K.:: Influence of Conjugate Heat Transfer on Film Cooling; Proceedings of the 5th European Conference on Turbomachinery, Prague, Czech Republic, March 2003

Bohn, D.:: Dezentrale Energiesysteme: Stand der Technik und Potenziale; VDI-GET Fachtagung "Fortschrittliche Energiewandlung und -anwendung", Stuttgart, Germany, March 2003 (VDI Berichte 1746, 2003, pp. 7-18)