Publications
1971 1972 1973 1974 1975 1976 1977 1979 1983 1984 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017
Kusterer, K., Moritz, N., Bohn, D., Sugimoto, T., Tanaka, R.:
Transient Numerical Investigation of Rotor Clocking in 1.5 Stage of an Axial Test Turbine with a Blade-To-Vane Ratio of 1.5
ASME-paper GT2010-22902, Proceedings of the ASME Turbo Expo 2010, Glasgow, United Kingdom, June 2010
Kusterer, K., Elyas, A., Bohn, D., Sugimoto, T., Tanaka, R., Kazari M.:
Film Cooling Effectiveness Comparison Between Shaped- and Double Jet Film Cooling Holes in a Row Arrangement
ASME-paper GT2010-22604, Proceedings of the ASME Turbo Expo 2010, Glasgow, United Kingdom, June 2010
Kusterer, K., Haj Ayed, A., Ghorbani, R., Kouhanjani, S. A.:
Fracture Analysis of a First Stage Turbine Blade
ASME-paper GT2010-22802, Proceedings of the ASME Turbo Expo 2010, Glasgow, United Kingdom, June 2010
Kusterer, K., Elyas, A., Bohn, D., Sugimoto, T., Tanaka, R., Kazari, M.:
Experimental and Numerical Investigations of the Double-Jet Film Cooling Technology
Journal of Energy and Power Engineering, Vol. 4, No. 9, pp 16-25, September 2010
Kusterer, K.:
Wege zu höchsteffizienter Schaufelkühlung zukünftiger Hochtemperatur-gasturbinen
Abschlusskolloquium des SFB 561 an der RWTH Aachen University, Aachen, Germany, May 2010
---------------------------------------------------------------------------------------------------------------
Publications from Univ.- Prof. Dr.-Ing. D. Bohn, former Director of the IDG (Institut für Dampf- und Gasturbinen, RWTH Aachen)
:
Bohn, D., Schwab, S., Sell, M.:
Analysis and Evaluation of the Impact of different Blade Loadings on a 2-Stage Turbine with Shrouded Blades
ASME Turbo Expo 2011 Vancouver, GT2011-46209, Canada, June 2011
Bohn, D., Willie, J.:
Measuremend based Atomization Model for Diesel Spray Evaporation and Combustion in a Matrix Burner
ASME Turbo Expo 2011 Vancouver, GT2011-45885, Canada, June 2011
Bohn, D., Krewinkel, R., V. Nolte:
Modelling and Control of the Rankine Cycle of a Small Solar Thermal Power Plant
ECOS-2010, Paper No. 633, Lausanne, Switzerland, June 2010,
Bohn, D., Ohlendorf, N., F. Weidner, Willie, J.:
Active Control of Combustion Instabilities in a Matrix Burner Using Primary and Pilot Fuel and Acoustic Forcing
ASME Turbo Expo, GT2010-23751, Glasgow, United Kingdom, June 2010
Bohn, D., Krewinkel, R., Wolff, A.:
Numerical Analysis of Heat Transfer and Flow Stability in an Open Rotating Cavity Using the Maximum Entropy Production Principle
ASME Turbo Expo, GT2010-22025, Glasgow, United Kingdom, June 2010.
Bohn, D., Ohlendorf, N., Willie, J.:
Effects of Non-Linearity on the Flame Response and Control of Combustion Instabilities in a Matrix Burner
Summer School and Workshop on Non-Normal and Nonlinear Effects in Aero- and Thermoacoustics, Munich, May 2010
Bohn, D., Wendland, D.:
Conjugate Calculation of Steam-Cooled Intermediate Pressure Turbine With a Live Steam Temperature of 720°C
ISROMAC-13, ISROMAC13-2010-028, Honululu, Hawaii, USA, April 2010
Bohn, D., Krewinkel, R., Wendland, D.:
Numerical Investigation of the Cooling Film Development on a Film- and Effusion-Cooled Blade
ISROMAC-13, ISROMAC13-2010-006, Honululu, Hawaii, USA, April 2010,
Bohn, D., Willie, J.:
Structure and Acoustic Analysis of a Gas Turbine Matrix Burner
ISROMAC-13, ISROMAC13-2010-005, Honululu, Hawaii, USA, April 2010
Bohn, D., Krewinkel, R., Chr. Rakut, Laschet, G., Rex, S.:
An Integrated Approach to the Calculation of Grid-Sheets for Steam Turbine Cooling
ISROMAC-13, ISROMAC13-2010-004, Honululu, Hawaii, USA, April 2010
Bohn, D., Schwab, S., Sell, M.:
Development of a LDA Endoscope for Determination of the Velocity Within Shrouded Rotor Blades
ISROMAC-13, ISROMAC13-2010-003, Honululu, Hawaii, USA, April 2010