1971 1972 1973 1974 1975 1976 1977 1979 1983 1984 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017
Kusterer, K., Becker, B., Hagedorn, T., Haj Ayed, A., Salehpour, L., Sugimoto, T., Kinoshita, Y., Bohn, D.:
Low NOX-Emission Study for an Industrial Gas Turbine Pre-Mixed Combustor
Proceedings of the International Gas Turbine Conference, IGTC-2007-ABS-009, Tokyo, Japan, December 2007
Bohn, D., Kusterer, K.:
Effiziente Kühltechnologie für Gasturbinen
1. Fachtagung "Moderne Karftwerkstechnik zur Reduzierung der CO2-Emissionen", Essen, Germany, 20.-21. November 2007
Kusterer, K., Bohn, D., Sugimoto, T., Tanaka, R.:
Double-Jet Ejection of Cooling Air for Improved Film Cooling
ASME Journal of Turbomachinery, Vol. 129, No. 4, pp. 809−815, revised version of ASME-paper GT2006-90854
Kusterer, K., Moritz, N., Bohn, D., Sugimoto, T., Tanaka, R.:
Reduction of Tip Clearance Losses in an Axial Turbine by Shaped Design of the Blade Tip Region
ASME-paper GT-2007-27303, Proceedings of the ASME Turbo Expo 2007, Montreal, Canada, May 2007
Kusterer, K., Bohn, D., Sugimoto, T., Tanaka, R.:
Influence of Blowing Ratio on the Double-jet Ejection of Cooling Air
ASME-paper GT-2007-27301, Proceedings of the ASME Turbo Expo 2007, Montreal, Canada, May 2007
Kusterer, K., Bohn, D.:
Experiences with the practical application of the conjugate calculation for turbomachinery
in: Verification and Validation Methods for Challenging Multiphysics Problems, pp. 57 ff., International Center for Numerical Methods in Engineering (CINME), Barcelona, Spain, 2007, ISBN: 84-96736-00-8
Kusterer, K., Hagedorn, T., Bohn, D.:
Unsteady Simulation of Slide Valve Operation in Power Plants
STAR EUROPEAN Conference 2007, London, U. K., March 2007
Publications from Univ.- Prof. Dr.-Ing. D. Bohn, former Director of the IDG (Institut für Dampf- und Gasturbinen, RWTH Aachen)
Bohn, D.:
Improved Cooling Concept for Turbine Blades of High-Temperature Gas Turbines
VGB PowerTech 12/2007 pp.96-103
Bohn, D.:
Sonderforschungsbereich 561 und ISF mit neuen Ideen für die Kraftwerksgeneration 2025
Proceedings des 10. internationalen Aachener Schweißtechnik Kolloquium, pp. 413-423, Aachen, Germany, October 2007
Bohn, D., Laschet, G., Rex, S., Krewinkel, R.:
3-Dimensional Numerical Analysis of Curved Transpiration Cooled Plates and Homogenization of Their Aerothermal Properties
ASME Journal of Turbomachinery 10 - 2007, Vol.129 , Issue 4, pp. 791-799 (Revised Version of GT2006-90377)
Bohn, D.:
Advanced Steam and Gas Turbines Technologies for Future Power Plant Generation
Bohn, D., Ren, J., P. Shan, Sürken, N.:
Parameter Survey of Thermally Highly Loaded, Porous and Cooled Multi-Layer Systems for Turbine Blade
Journal of Thermal Science, Vol.16, No.2, 2007, pp. 181-185 (Revised Version of "2006-ISJPPE-3011")
Bohn, D., Ren, J., Kusterer, K.:
Investigation of the Steam-Cooled Blade in a Steam Turbine Cascade
Bohn, D.:
Hybrid System - A Promising Way Solving Future Energy Problems
Journal of Aerospace Power, Vol. 22, No. 4, pp. 565-576 (ISSN 1000-8055) (Revised Version of "2006-ISJPPE-Invited Lecture")
Bohn, D.:
Das Kombikraftwerk der Zukunft
RWTH Themen, Sonderheft Sommersemester 2007, pp. 22-26 (ISSN 0179-079X)
Bohn, D., Krewinkel, R.:
The Influence of Manufacturing and Operational Factors on the Temperature in Effusion-Cooled Gas Turbine Parts
GTE-2007, Kyiv, Ukraine, May 2007
Hagedorn, T., Bohn, D., Kusterer, K.:
Unsteady Simulation of a Slide Valve Operation
March 2007
Bohn, D., Ren, J.:
Influence of Laminar and Turbulent Viscosity on the Unstable Flow Pattern in a Rotating Cavity
7th European Turbomachinery Conference, Paper B-135, Athens, Greece, March 2007
Bohn, D., Krewinkel, R.:
Effects of Concave and Convex Curvature on the Cooling Effectiveness of Effusion Cooled Multi-Layer Plates
7th European Turbomachinery Conference, Paper B-133, Athens, Greece, March 2007